 |
|
 |
|
 |
1. |
Maximum continuous total DC output power should not exceed 850 / 1000W for
|
|
STABLEPOWER 850W / 1000W |
2. |
Maximum continuous combined load on +3.3 VDC and +5 VDC outputs shall not exceed |
|
200W for STABLEPOWER 1000W |
Maximum c.ontinuous combined load on +3.3 VDC and +5 VDC outputs shall not exceed |
180W for STABLEPOWER 850W. |
3. |
Maximum peak total DC output power should not exceed
|
| |
900W for STABLEPOWER 850W / 1100W for STABLEPOWER 1000W |
4. |
Peak power and current loading shall be supported for a minimum of 12 second. |
5. |
Maximum combined current for the 12 V outputs shall be 70A. |
6. |
Peak current for the combined 12V outputs shall be 70A. |
| |
|
  |
| |
+12V Output Distribution:
+12V1 (1ST channel) > Motherboard
+12V1 (2ND channel) > CPU
+12V2 (1ST channel) > AGP or PCI-E
+12V2 (2ND channel) > IDE, SATA device |
| |
|
Accessories: |
| |
Screws * 4PCS
Cable Clips * 4PCS
User Manual * 1PC
Connector:
Modular 20+4pins modular connector
Modular 4+4 connector for 8pins server or 4pins motherboard power
PCI express * 4PCS
4 Pins Molex connector * 8PCS
SATA * 8PCS
Floppy * 1PC |
|
|
| |
|
 |
| |
Model
|
|
Brand |
XClio |
|
Series |
STABLEPOWER |
|
Model |
STABLEPOWER 850W / 1000W |
|
SPEC
|
|
Type |
ATX |
|
Maximum Power |
850W / 1000W |
|
Fans |
1 * 14cm |
|
PFC |
Active |
|
Dual +12V |
Yes |
|
Power Good Signal |
100-500ms |
|
|
Hold-up Time |
17msec |
|
Efficiency |
80% under full Load at nominal input voltage |
|
Over Voltage Protection |
YES, +3.3V, +5V and +12V. |
|
Overload Protection |
YES, +3.3V, +5V. |
|
Input Voltage |
Auto voltage detection 90V.~264V.(850W) / 100V.~264V.(1000W) |
|
Input Frequency Range |
47Hz ~ 63Hz |
|
PCI Express Connector |
1 |
|
Output |
+3.3V@25A;+5V@30A;+12V1@35A;+12V2@35A;-12V@0.5A;+5VSB@3.0A |
|
MTBF |
100K hrs minimum, 25℃ ambient |
|
Approvals |
UL, CUL, TUV, CB, VDE, FIMKO, DEMKO, NEMKO, SEMKO |
|
|
|
|
|
|
 |
 |
|
